Sub-GHz Technologies: A Critical Enabler for IoT and Wireless Communication

JIMS
4 min readNov 4, 2024

--

Sub-GHz (sub-gigahertz) technologies refer to wireless communication protocols that operate in frequency bands below 1 GHz, typically in the 300 MHz to 1 GHz range. These technologies are particularly important for low-power, long-range wireless communication, making them an ideal solution for a wide range of applications, especially in the Internet of Things (IoT). Sub-GHz frequencies have several advantages over higher-frequency bands like those used by Wi-Fi and Bluetooth, including better penetration through obstacles and longer communication range. The adoption of sub-GHz technologies has been crucial in sectors like smart cities, industrial automation, and agriculture, where efficient, scalable wireless networks are essential.

Key Benefits of Sub-GHz Technologies

1. Longer Range:

One of the most significant advantages of sub-GHz frequencies is their ability to transmit signals over long distances. Due to the lower frequency, sub-GHz signals can travel farther without significant signal degradation, making them ideal for outdoor and rural applications. For example, in agriculture, sub-GHz technologies are used to connect sensors across vast farmlands for tasks like soil monitoring, water management, and crop health surveillance.

2. Better Penetration:

Sub-GHz frequencies have superior penetration capabilities compared to higher-frequency bands such as 2.4 GHz or 5 GHz. This allows sub-GHz signals to pass through walls, trees, and other obstacles more effectively, making them suitable for indoor applications and urban environments where buildings and other structures can obstruct signal propagation. This makes sub-GHz highly valuable for smart buildings and industrial automation, where sensors often need to communicate through walls and machinery.

3. Lower Power Consumption:

Devices that use sub-GHz technologies tend to consume less power compared to those operating at higher frequencies. This is due to the slower data rates and longer wavelengths of sub-GHz signals, which reduce the energy required for transmission. As a result, sub-GHz technologies are widely used in battery-powered IoT devices that need to operate for extended periods without frequent battery replacements, such as environmental sensors, smart meters, and wearable devices.

4. Reduced Interference:

The sub-GHz bands are typically less crowded than the higher-frequency 2.4 GHz and 5 GHz bands, which are widely used by Wi-Fi, Bluetooth, and other consumer devices. This means there is less interference, leading to more reliable and stable communication. Sub-GHz technologies are especially useful in industrial settings where interference from other wireless networks could disrupt critical operations.

Common Sub-GHz Technologies and Protocols

1. LoRa (Long Range):

LoRa is one of the most well-known sub-GHz technologies, used primarily for long-range, low-power communication. It operates in unlicensed frequency bands such as 868 MHz (Europe) and 915 MHz (North America) and is a key technology behind LoRaWAN (Long Range Wide Area Network), which is widely used for IoT applications. LoRa enables communication over distances of up to 15 km in rural areas and several kilometers in urban settings, making it ideal for applications like smart cities, agriculture, and environmental monitoring.

2. Sigfox:

Sigfox is another sub-GHz technology that operates in the unlicensed ISM (Industrial, Scientific, and Medical) bands, typically around 868 MHz or 915 MHz. Sigfox is designed for ultra-narrowband communication, which allows for very low data rates but extends the communication range and minimizes power consumption. This makes Sigfox ideal for applications where small amounts of data need to be transmitted over long distances, such as asset tracking, remote monitoring, and smart metering.

3. Zigbee (Sub-GHz variant):

While Zigbee traditionally operates in the 2.4 GHz band, there is a sub-GHz variant that uses frequencies below 1 GHz, such as 868 MHz in Europe. The sub-GHz variant of Zigbee offers better range and lower power consumption, making it suitable for IoT applications that require devices to be spread over large areas, such as smart grids and energy management systems.

4. Wireless M-Bus (Meter-Bus):

Wireless M-Bus is a European standard for wireless communication in smart metering systems, commonly used for utility meters such as water, gas, and electricity. It operates in sub-GHz frequencies like 868 MHz and is designed for reliable, low-power communication over long distances, making it an effective choice for remote meter reading in smart city infrastructure.

Applications of Sub-GHz Technologies

1. Smart Cities:

In smart city infrastructure, sub-GHz technologies are essential for applications like smart lighting, waste management, and environmental monitoring. The long-range capabilities of sub-GHz networks make them ideal for connecting devices across large urban areas, ensuring that sensors and actuators can communicate efficiently even in dense city environments.

2. Agriculture:

Agriculture benefits greatly from sub-GHz technologies due to their long-range and low-power characteristics. Wireless sensor networks based on sub-GHz frequencies can monitor soil moisture, weather conditions, and crop health across large farmlands, helping farmers optimize irrigation, pest control, and harvesting processes.

3. Industrial Automation:

Sub-GHz technologies are widely used in industrial automation to connect sensors, machines, and control systems over large factory floors or outdoor industrial sites. The long-range communication and ability to penetrate through walls and metal structures make sub-GHz ideal for industrial IoT applications.

Challenges and Considerations

While sub-GHz technologies offer many benefits, they also have limitations. The lower data rates associated with sub-GHz communication mean that it is not suitable for high-bandwidth applications like video streaming or real-time data analysis. Additionally, regulatory restrictions on sub-GHz frequency usage vary by region, which can complicate global deployments.

Conclusion

Sub-GHz technologies play a crucial role in enabling long-range, low-power communication in IoT and wireless applications. Their ability to penetrate obstacles, consume less power, and operate in less congested frequency bands makes them an attractive choice for a wide range of industries, from smart cities to agriculture and industrial automation. As IoT continues to expand, sub-GHz technologies will remain a key enabler for large-scale, efficient, and reliable wireless networks.

Mr Vijendra Rawat

--

--

JIMS
JIMS

Written by JIMS

JIMS Engineering Management Technical Campus is one of the Best Engineering Colleges at Greater Noida It has well-developed campus